Parador Acoustic Protect 200 High-tech acoustic mat for non-mineral substrates

Parador Acoustic Protect 200 high-tech acoustic mat for non-mineral surfaces

This high-tech acoustic mat absorbs both room and impact sound very well due to its high dead weight. Room sound is the sound that is generated in the room itself, for example by walking on the floor. Impact sound is the part of the room sound that is transmitted via the floor and walls into adjacent rooms. The acoustic mat was specially developed for use under floating floor coverings on non-mineral subfloors. Therefore it does not have an integrated vapour barrier. This is usually only required for mineral substrates.

Where is this acoustic mat used?

• on existing wooden floors
• under floating laminate floors
• under solid wood parquet, which is laid floating
• under finished parquet, which is laid floating
• under floating full vinyl floors
• under floating vinyl floors with carrier plate
• under design shelves with click connection

Environmental protection and health

This acoustic mat is free of heavy metals, plasticizers and formaldehyde. It also contains no CFCs, no solvents and no ozone-depleting substances. This is why it also achieves level A+ in the VOC classification (VOC means "volatile organic compounds"). This VOC classification deals with emissions inside houses and apartments. The insulation mat is recyclable and can be disposed of with household waste. It is therefore good for the environment as well as your health and you can use it with a clear conscience.

What do you have to consider when laying this acoustic mat?

The substrate must be firm, dry, level, free from cracks and clean. The floor temperature should not be below 15 °C and not above 25 °C, while a room temperature of at least 18 °C is ideal. The relative humidity in the room in which the installation is to be carried out must not significantly exceed 65%. The acoustic mat is unrolled and cut with a cutter knife. Lay the strips of the mat side by side. The joints do not need to be glued together.

Overview of the properties of Parador Acoustic-Protect 200 high-tech acoustic mat for non-mineral substrates

• Length: 7.5 m (+ 15 mm)
• Width: 1,0 m (+/- 1mm)
• 7.5 m² of the acoustic mat are on one roll
• Thickness: 2.0 mm (+/- 0.15 mm)
• Weight: 2 kg/m² (+/- 0,15 kg/m²)
• suitable for hot water floor heating systems
• Thermal resistance: 0.01 m²K/W
• Compressive strength: maximum 150 kPa
• Reduction of walking noise: 29 % (+/- 2 %)
• Impact sound insulation: 18 dB (+/- 2 dB)
• Fire behaviour: Efl (without the floor covering)