Manufacturer: Tarkett Parquet Series: Pure 1-strip wideplank / plank XT Sorting: Rustic Finish: Proteco Natura, brushed Decor: Oak bevel: Mini bevel, 2-sided Warranty: 30 years in residential / 10 years in commercial use Installation connection: 2-lock construction: 3-layer construction for excellent dimensional stability Thickness: 14mm Width: 19cm Length: 2m Piece in pack: 6 this corresponds to 2.28m²
The Tarkett parquet Pure Rustic Oak flooring Brushed Oak wideplank is available in different versions. Kaiser offers the Tarkett parquet Pure Rustic Oak wideplank brushed as extra large XL-board, as XT-board, as XT-XL-board and/or sealed with hard wax oil. All the floor coverings in the Pure series are characterised by a rustic look that brings out the natural grain and knotting in the material.
The main characteristics of Tarkett parquet Pure Rustic Oak Brushed Plank
When do you need a vapour barrier for your parquet floor?You always need a vapour barrier between the subfloor and the parquet floor if moisture can rise from the floor. This is especially the case with anhydrite and cement screeds. But also if the floor is above a laundry room or boiler room or if the parquet is to be laid over underfloor heating. The vapour barrier consists of a polyethylene film at least 0,2 mm thick or a combined insulation underlay consisting of a vapour barrier and an insulating foam mat. When laying, you should allow the edges of the foil to overlap by approx. 20 cm and stick them together along the entire length with a suitable adhesive tape.
You should bear this in mind when laying the parquetBefore laying, the parquet must spend at least 24, better 48 hours lying in the room to acclimatise. It should be at least one meter away from the walls. This is the only way to ensure appropriate air circulation. Leave the boxes with the planks closed. To achieve an optimum result, ensure a room temperature of 18 °C and a relative humidity of between 30 % and 60 % 1 to 2 days before and at least 3 days after laying. With natural wood there are always small variations in colour. Therefore, when laying the boards, take them alternately from different boxes. This gives you a more even colour distribution. Wood is a material that expands or contracts depending on the humidity in the air. Therefore, you must leave expansion joints of approx. 2 mm per meter of room width towards the walls. These expansion joints are covered by skirting boards at the end of the installation. With the 2-lock system you can easily lay the parquet floor without tools. Insert the planks at a small angle from above into the profile of the previous row. The floorboard locks into place by pressing down on the floor.
|Manufacturer series name||Pure|
|Type of wood or style / pattern||Oak|
|Decor - wood pattern||Oak|
|Color World||Beige brown & Friendly|
|Surface||Proteco Natura, brushed|
|Parquet flooring sorting||Rustic|
|Product group||1-strip / plank XT|
|Type of bevel||Mini-bevel on 2 sides|
|Construction||3-layer construction with excellent stability|
|Link / joint / connection type||2-lock|
|Integrated sound insulation||No|
|Manufacturer warranty in years||30 Years in living area / 10 Years in commercial area|
|Surface layer mm||3.5|
|Manufacturer's laying instructions||Download|
|Manufacturers fact sheet||Download|
|Manufacturer's warranty document||Download|