Wicanders adhesive for cork flooring contact adhesive Latex W-240 1kg
Wicander's special adhesive for cork floors is suitable for clean and safe bonding of cork floors with cork backs, cork tiles and cork boards indoors. Cork floors of all kinds are glued firmly and precisely to the professionally pre-treated substrate with this odourless and ready-to-use contact adhesive. The latex-based cork floor adhesive from the quality manufacturer Wicanders reliably bonds heat-insulating and natural cork floor coverings to any suitable subfloor. Of course, this first requires careful preparation of the screed or subfloor. The subfloor must - as always when gluing - be level, smooth, dust-free and dry. After careful preparation, apply Wicanders cork floor contact adhesive Latex W-240 evenly and generously to the subfloor and the cork tiles to be laid using a notched trowel. If something goes wrong, that is no problem at all! The water-soluble cork contact adhesive can be removed easily and residue-free from the cork tiles with water when wet. It is important for a convincing result that the temperature in the room is right when gluing the cork floor. It should be between 18ºC and 28ºC with a relative humidity of 35% to 65%. In the cold season, cork floors and cork adhesive must therefore acclimatise in the room for some time. This can also be overnight if temperatures are below zero. Incidentally, the high-performance Wicander cork adhesive in a 5-kilo bucket can also be used without any problems when laying cork floors on hot water underfloor heating systems. Because the temperature is too high on electric underfloor heating systems, this cork adhesive is not recommended for this purpose. When it comes to consumption, you can calculate with about 250 grams per m². One bucket is therefore sufficient on average for areas of about 15 - 20 m².
The professional cork glue for your healthy home!
Anyone who has decided on cork as a floor covering in the home or office usually attaches great importance to natural and healthy living comfort. To ensure that your attractive and healthy cork flooring (e.g. from the Wicanders Cork Pure series) adheres securely and firmly, you should not make any compromises when it comes to the adhesive used. You will always achieve the best results with the right material! The particularly low-emission cork adhesive from the cork flooring specialist Wicanders is specially made for cork and difficult materials. Contact adhesive Latex W-240 is a very adhesive, ready-to-use and low-emission material that is easy to use even by less experienced do-it-yourselfers. This particularly easy to spread adhesive based on natural latex does not damage the natural material cork or the substrate. Of course, you will find instructions on the product with more detailed information about the installation. If you have any questions or uncertainties regarding the gluing of cork floors and cork boards, our specialists at Parquett-Kaiser will be happy to provide you with tips and recommendations. Just give us a call!