Forbo eurocol 879 Euroclean Oil Care and inlet oil 2.5 L

Forbo eurocol 879 Euroclean Oil Care and Intake Oil 2,5 L

For the effective impregnation and care of hard or soft wood floors subject to heavy wear, Forbo Euroclean's care and inlet oil is perfect! Plank floors, industrial parquet and heavily used sprung floors receive strong protection for robust and long-lasting appeal when treated with the low-viscosity care oil. The impregnation and care oil is effective and very economical. When applied with the oil-wax roller, you can get by with a quantity of about 80 - 100 g for one square metre of floor surface. The impregnating oil hardens oxidatively and should be polished after drying with a white, lint-free cloth or with the machine.

Extend the life of your high-quality wooden floor!

In entrance areas, hotel foyers, hallways or dance studios, high-quality parquet floors are regularly subjected to heavy wear and tear. Street dirt, treaded soles, moisture and sunlight are challenges that even robust wooden floors face in everyday life. If you treat oiled or waxed parquet floors with the solvent-based maintenance oil Forbo Eurocol 879 before first use and from time to time, you will noticeably extend the life of your hardwood or softwood floor.

How does it work?

Before impregnation, the surface must be clean and completely free of oil, wax or silicone residues. Mechanical cleaning and sanding with a not too fine abrasive is recommended. The use of an abrasive grid is ideal. Because the oil works differently on every surface, we recommend a small-area trial coating. Shake the oil vigorously before use and then apply it wet on wet with the Eurotool Oil-Wax Roller. Roll until the oil covers the entire surface and is no longer absorbed by the wood. Remove excess oil with a spatula or rubber wiper and massage in without leaving any residue. For refreshing or in-between cleaning, you can apply the oil locally with a spray can or wipe over the entire surface. Do not mop the treated floor with water for the first 8 - 10 days!

• Container 2,5 litres
• improves the durability of the wood surface
• Drying time: approx. 24 hours when applied by roller