

Parador Acoustic Protect 200 High-tech acoustic mat for non-mineral substrates
Information
Manufacturer: Parador Acoustic Protect 200 High-tech acoustic mat for non-mineral surfaces Series: Acoustic Protect 200 Thickness: 2mm Width: 100cm Length: 7m Piece in package: 1 this corresponds to 7 m²
Parador Acoustic Protect 200 high-tech acoustic mat for non-mineral surfacesThis high-tech acoustic mat absorbs both room and impact sound very well due to its high dead weight. Room sound is the sound that is generated in the room itself, for example by walking on the floor. Impact sound is the part of the room sound that is transmitted via the floor and walls into adjacent rooms. The acoustic mat was specially developed for use under floating floor coverings on non-mineral subfloors. Therefore it does not have an integrated vapour barrier. This is usually only required for mineral substrates. Where is this acoustic mat used?The Parador Acoustic Protect 200 high-tech acoustic mat for non-mineral substrates is used:
Environmental protection and healthThis acoustic mat is free of heavy metals, plasticizers and formaldehyde. It also contains no CFCs, no solvents and no ozone-depleting substances. This is why it also achieves level A+ in the VOC classification (VOC means "volatile organic compounds"). This VOC classification deals with emissions inside houses and apartments. The insulation mat is recyclable and can be disposed of with household waste. It is therefore good for the environment as well as your health and you can use it with a clear conscience. What do you have to consider when laying this acoustic mat?The substrate must be firm, dry, level, free from cracks and clean. The floor temperature should not be below 15 °C and not above 25 °C, while a room temperature of at least 18 °C is ideal. The relative humidity in the room in which the installation is to be carried out must not significantly exceed 65%. The acoustic mat is unrolled and cut with a cutter knife. Lay the strips of the mat side by side. The joints do not need to be glued together. Overview of the properties of Parador Acoustic-Protect 200 high-tech acoustic mat for non-mineral substrates
| |
Brand | Parador |
---|---|
Manufacturer series name | Akustik Protect 200 |
Self-adhesive | No |
Underfloor heating | Yes |
Humidity resisstant | No |
Height (mm) | 2,00 |
Thickness (mm) | 2,00 |
Width (mm) | 1.000,00 |
Length (mm) | 7.000,00 |
Quality | A1 sorting |
Floor type suitability | Laminate, Parquet |
Heat transmission resistance | 0,01 m²K/W |
Manufacturer EAN | Parador 4014809091882 |
Manufacturers fact sheet | Download |