Skaben 042 Euroblock Turbo - One-component damp proof and surface reinforcement coating 11 kg

Skaben Euroblock Turbo 1K - PU barrier primer and undercoat for screed 11 kg

This high-performance barrier primer from Skaben also prepares damp substrates excellently for subsequent filling work and parquet installation. Certified to EMICODE EC 1 R, the installation material is an exceedingly low-emission moisture barrier that is particularly suitable for cement screeds with a residual moisture content of up to 5 CM %. The non-frost-resistant product is a ready-to-use, particularly fast-curing 1-component PUR reactive resin primer that reliably prevents non-pressing residual moisture from rising in the subfloor of interior areas.

How to apply Skaben Euroblock Turbo professionally?

Only professional application enables good results. In case of doubt, seek advice and carefully read the instructions for use enclosed with the product. The primer must be rolled out thinly and evenly on the professionally prepared substrate. It is essential to avoid the formation of puddles, as these delay the rapid curing process. In the worst case, the protective layer will remain permeable to water. A short-pile lambskin roller and a rubber scraper help to apply the material evenly. Depending on the room climate, the drying time is 120 - 240 minutes. If multiple coats of primer are necessary, each coat must dry completely.

This must be observed!

Be sure to store this product out of reach of children! During application and drying, please ensure good ventilation. Of course, you must not eat, drink or smoke while working with Skaben Euroblock Turbo! Pay attention to the health instructions and possible allergic reactions due to the isocyanate contained. All in all, this is a very low-emission and environmentally friendly barrier primer that professionally prepares substrates for subsequent installation work.

Worth knowing about the Euroblock Turbo barrier primer from Skaben at a glance!

• 1-component PU barrier primer up to 5 CM
• Packaging quantity: 11 kg
• water-free
• Color: brown
• ready for use, no mixing with hardener necessary
• declared as ecological building product
• Consumption: depending on density of substrate approx. 100 - 150 g/m²

The water-free PUR prepolymer primer!

If you want to glue parquet on screed with residual moisture, you need a professional and powerful barrier primer to prevent moisture from rising into the wood floor. Skaben's user-friendly Euroblock Turbo is suitable for professionals and DIYers alike. For good results, make sure the floor temperature is at least 15 degrees Celsius when applying the barrier primer. The material and room temperature should be at least 18 °C during application and subsequent drying. Best results are achieved at a relative humidity of less than 65%. Do you have any further questions? Our parkettkaiser experts will support you with practical user tips!