Skaben 232 Mounting adhesive 310 ml for cartridge gun

Skaben assembly adhesive assembly adhesive 310 ml for cartridge gun

This handy and strong mounting adhesive from Skaben is particularly suitable for fixing skirting boards made of wood and rigid PVC. Wall panels, chipboard and sheetrock, as well as insulation and acoustic panels can also be fixed cleanly and stably to walls and floors with this adhesive for the cartridge gun. For Styrofoam, however, this assembly adhesive is not suitable.

What you should know about the assembly adhesive 232 from Skaben

As a flooring professional and ambitious do-it-yourselfer, you know how important the right adhesive is for all kinds of installation and renovation work. To ensure that skirting boards, insulation boards and wall panels sit firmly and solidly in the right place and do not come loose prematurely under any circumstances, a high-quality, high-strength construction adhesive is indispensable. Skaben assembly adhesive 232 is a professional helper in interior finishing. The cartridge fits into any standard cartridge gun. This makes working with this assembly adhesive from Skaben particularly ergonomic, productive and effective! After opening the 310 ml cart ridge, you should use up the adhesive quickly if possible or close the cartridge tightly immediately after each work step.

The Skaben assembly adhesive for perfect skirting boards!

The most beautiful parquet floor can not work if the wall finish is missing. Skirting boards are exposed in everyday living to the knocks of the vacuum robot as well as the scooter or toy car of your children. Even without manual stress, the moldings will prematurely detach from the wall if the adhesive used is not strong enough. Skaben's Adhesive 232 bonds wall panels and baseboards so tightly that gravity and impact don't stand a chance!

Important properties of the mounting adhesive at a glance!

• pasty
• white, does not stain
• Consumption: approx. 20 - 40 ml/per running meter

This is how you work with this assembly adhesive!

Temper the cartridge and the materials to be bonded to at least 18°C. A relative humidity between 35 - 75% is important, best results are achieved when the humidity is lower than 65%. Unscrew the nozzle tip and cut the tip according to the width of the joint to be glued. You should now apply the adhesive to one side of the material or substrate, in dots or waves. Immediately join the parts to be glued, then allow the adhesive to flash off for a maximum of 10 minutes before pressing on and rubbing down the moldings or panels. Do you have questions about the specific procedure? The instructions for use enclosed with the product explain the procedure to you in great detail. If you have any questions in advance, just give us a call! We know what is important in floor bonding, interior finishing and other renovation work and will be happy to tell you tried and tested tips and tricks!