Parador Laminate Classic 1050 Oak Monterey light-whitewashed 1-strip 4V

Parador Laminate Flooring Classic 1050 Oak Monterey Light White Full Plank 4V

You should avoid these errors

There are some mistakes in the handling of laminate, which unfortunately are made again and again. They considerably reduce the enjoyment of the laminate flooring and are responsible for forfeiting the warranty.

When laying the laminate

Before installation, the laminate flooring needs 48 hours to acclimatise in the room in which it is to be laid. To do this, lay the unopened packages flat on the floor. If this acclimatisation phase is skipped or shortened, the laminate may warp during installation or later. During installation, you must ensure that expansion joints are maintained on all sides that border on fixed obstacles. These obstacles are of course the walls, but also, for example, door frames or heating pipes. If these expansion joints are not created, the floor may bulge

When maintaining the floor

Even if the laminate has all-round edge swell protection, it is still sensitive to too much water. If you wipe too wet or do not wipe up standing water immediately, it will run into the joints and get at the edges of the laminate. However, these are made of wood that swells up due to the water. If you use the wrong detergent, the laminate floor may look cloudy. This is because the cleaning agent forms layers on the floor. Use the special cleaning agent for laminate, which you can also get from ParktettKaiser, to ensure that you can enjoy your floor for a long time.

Characteristics of Parador laminate Classic 1050 Oak Monterey Light White wideplank 4V at a glance

• Manufacturer: Parador
• Series: Classic 1050
• Wood type: Oak
• Surface: slightly white
• Design: Full plank with all-round bevel
• Colour: matt red-brown
• Length: 1285 mm
• Width: 194 mm
• Thickness: 8 mm
• Packing unit: 10 planks per package, this gives 2.493 m²
• Weight of a parcel: 19,4 kg
• floating installation by means of Safe-Lock connection
• not approved for full-surface bonding
• not suitable for installation in damp rooms
• suitable for installation over water-bearing floor heating systems
• Thermal resistance: 0.048 m²K/W
• Service classes: Private = NK23, Commercial = NK 32
• Resistance to abrasion: AC 4