Chat-Support
Skaben

Skaben Primer Plus 2,6 kg Universal Primer

Item number: SK_Z_FOB175111
No longer available
Not available
Suitable accessories
Accessories

Information

Skaben Primer Plus 2.6 kg - dispersion primer (ready to use) - for pre-treatment of floors before applying the adhesivefor absorbent, mineral substrates: Cement screed, calcium sulfate-bonded screed, dry screed, screed for non-absorbent substrates: Wood-based panels, cleaned stone floors and ceramic floors, mastic asphalt. Use: before full and partial surface filling work with putties Basis: PVDC dispersion Density: approx. 1.12 g/cm³ Packaging: 2.60 kg

More Information
The clever universal primer under parquet and filling compounds

Skaben Primer Plus in a handy 2.6 kg canister is an emulsion primer that facilitates filling work and parquet laying. This ready-to-use universal primer is equally suitable for absorbent and non-absorbent substrates. If you want to prepare cement screed, dry screed or screed bonded with calcium sulfate for trowel work and parquet, you will find the right support in Skaben Primer Plus. You can use this versatile primer equally well on non-absorbent stone and ceramic floors, wood-based panels and even mastic asphalt.

How do I apply Skaben Primer Plus dispersion primer?

Of course, you will get the best results if you use it properly. Be sure to shake the low viscosity primer in the Skaben Primer Plus 2.6 kg Universal Prim er Canister vigorously before use. This should produce a homogeneous liquid that does not need to be diluted further! For the even application of Skaben Primer Plus dispersion primer, you can use a microfiber roller, brush or brush, depending on the location and size of the surface to be treated. It is important to work evenly and sparingly so that no puddles form! As soon as the primer has dried thoroughly, you can use the now perfectly prepared substrate for your next work steps.

This is important to know!

This product must be kept out of reach of children! Ensure good ventilation during painting and drying. Of course, you should not eat, drink or smoke while working with Skaben Primer Plus! Should the dispersion primer come into contact with skin or eyes, the affected areas must be immediately rinsed very thoroughly with water. To protect your tools, you should clean brush, brush or roller immediately with soap and water after applying the primer.

Facts worth knowing about Skaben Primer Plus Universal Primer at a glance!
  • Skaben Primer Plus Universal primer under parquet and putty
  • Packaging quantity: 2.6 kg
  • Basis: PVDC dispersion
  • Density of the mixture: approx. 1.12 g/cm³
  • Consumption: depending on the density of the substrate approx. 80 - 90 g/m²
The compact universal primer for small areas!

If you want to lay parquet professionally in smaller rooms, the compact container of Skaben's universal primer is the best choice. Since high-quality parquet requires a professionally prepared substrate, Skaben Primer Plus is a smart choice! For good results, make sure that the floor temperature is at least 15 degrees Celsius during application. The product itself and the temperature in the room should not fall below the value of 18 °C. Best results are achieved at a relative humidity of less than 65%. The lower the floor or room temperature and the higher the humidity, the longer it will take for this universal primer to dry through. Do you still have questions? Our parkettkaiser floor practitioners will help you competently!

Brand Skaben
Quality A1 sorting
Eco-label / Certification GEV-Emicode Plus sehr emissionsarm Siegel
Manufacturer EAN Skaben 4056004022537
Manufacturers fact sheet Download
Deliverty time
2-3 Tage